Asiga

Printer Settings

Visit asiga.com and log in to download the needed .ini files. Import the files into Asiga Composer for use.

Compatible Cure Boxes

Compatible Resins

KeyModel – 30 minutes per side
KeyOrthoModel – 30 minutes per side
KeyMask – 30 minutes per side

Compatible Resins

KeyModel Ultra – 10 minutes total
KeyModel – 40 minutes total
KeyOrthoModel – 40 minutes total
KeyCast – 40 minutes total
KeyMask – 20 minutes total
KeyGuide – 40 minutes total
KeyTray – 40 minutes total
KeySplint Soft – 50 minutes total

Compatible Resins

KeyModel Ultra – 20 minutes total
KeyModel – 40 minutes total
KeyOrthoModel – 40 minutes total
KeyMask – 40 minutes total
KeyTray – 50 minutes total

Compatible Resins

KeyModel – 3 minutes per side
KeyOrthoModel – 2 minutes per side
KeyMask – 1 minute per side

Compatible Resins

KeyModel Ultra – 2000 flashes per side
KeyModel – 4000 flashes per side
KeyOrthoModel – 4000 flashes per side
KeyCast – 2000 flashes per side
KeyMask – 4000 flashes per side
KeyGuide – 2000 flashes per side
KeyTray – 2000 flashes per side
KeySplint Soft – 2000 flashes per side
KeySplint Hard – 2000 flashes per side
KeyOrtho IBT – 1000 flashes per side

Compatible Resins

KeyModel Ultra – 2 minutes per side
KeyModel – 2 minutes per side
KeyOrthoModel – 2 minutes per side
KeyCast – 1 minute per side
KeyMask – 2 minutes per side
KeyGuide – 150 seconds per side @ 50% intensity
KeyTray – 2 minutes per side
KeySplint Soft – 2 minutes per side
KeySplint Hard – 90 seconds per side
KeyOrtho IBT – 1 minute per side

Notes

  • Validations are done at 100% intensity unless otherwise noted
  • For Uvitron 600W, same post cure settings apply at 66% intensity
  • Validations are done at the lowest rack
Compatible Resins

KeyModel Ultra Ivory – 20 minutes per side at 60°C
KeyModel Ultra Light Grey – 40 minutes per side at 60°C
KeyGuide – 5 minutes per side at 60°C
KeySplint Soft – 20 minutes per side at 60°C
KeyTray – 5 minutes per side at 60°C
KeyOrtho IBT – 5 minutes per side at 60°C
KeySplint Hard – 5 minutes per side at 60°C

Compatible Resins

KeyCast – 5 minutes per side

Compatible Resins

KeySplint Soft – 15 minutes total

Visit the post-cure page for a full list of compatible post-cure units.

Compatible Cure Boxes

Compatible Resins

KeyModel – 30 minutes per side
KeyOrthoModel – 30 minutes per side
KeyMask – 30 minutes per side

Compatible Resins

KeyModel Ultra – 10 minutes total
KeyModel – 40 minutes total
KeyOrthoModel – 40 minutes total
KeyCast – 40 minutes total
KeyMask – 20 minutes total
KeyGuide – 40 minutes total
KeyTray – 40 minutes total
KeySplint Soft – 50 minutes total

Compatible Resins

KeyModel Ultra – 20 minutes total
KeyModel – 40 minutes total
KeyOrthoModel – 40 minutes total
KeyMask – 40 minutes total
KeyTray – 50 minutes total

Compatible Resins

KeyModel – 3 minutes per side
KeyOrthoModel – 2 minutes per side
KeyMask – 1 minute per side

Compatible Resins

KeyModel Ultra – 2000 flashes per side
KeyModel – 4000 flashes per side
KeyOrthoModel – 4000 flashes per side
KeyCast – 2000 flashes per side
KeyMask – 4000 flashes per side
KeyGuide – 2000 flashes per side
KeyTray – 2000 flashes per side
KeySplint Soft – 2000 flashes per side
KeySplint Hard – 2000 flashes per side
KeyOrtho IBT – 1000 flashes per side

Compatible Resins

KeyModel Ultra – 2 minutes per side
KeyModel – 2 minutes per side
KeyOrthoModel – 2 minutes per side
KeyCast – 1 minute per side
KeyMask – 2 minutes per side
KeyGuide – 150 seconds per side @ 50% intensity
KeyTray – 2 minutes per side
KeySplint Soft – 2 minutes per side
KeySplint Hard – 90 seconds per side
KeyOrtho IBT – 1 minute per side

Notes

  • Validations are done at 100% intensity unless otherwise noted
  • For Uvitron 600W, same post cure settings apply at 66% intensity
  • Validations are done at the lowest rack
Compatible Resins

KeyModel Ultra Ivory – 20 minutes per side at 60°C
KeyModel Ultra Light Grey – 40 minutes per side at 60°C
KeyGuide – 5 minutes per side at 60°C
KeySplint Soft – 20 minutes per side at 60°C
KeyTray – 5 minutes per side at 60°C
KeyOrtho IBT – 5 minutes per side at 60°C
KeySplint Hard – 5 minutes per side at 60°C

Compatible Resins

KeyCast – 5 minutes per side

Compatible Resins

KeySplint Soft – 15 minutes total

Visit the post-cure page for a full list of compatible post-cure units.

About Asiga

In 2011 Asiga launched the world’s first LED based DLP 3D printer and started the affordable desktop stereolithography revolution which changed digital manufacturing forever.

Asiga won the MJSA’s 2012 Thinking Ahead award for best new technology and gained international recognition for the innovations contained within the Pico and Pro platforms that continue to lead their respective categories to this day.

Asiga designs and manufactures all products at our headquarters in Sydney, Australia. Our in-house mechanical, electronics, software and materials team ensures our continued innovation and product improvement.